What is a industrial hot air blower used for?

Hot air blower is one of the most commonly used tools in What is a industrial hot air blower used for?


A industrial hot air blower, often referred to as a industrial hot air blower, is a must-have tool for professionals, crafts people and DIY masters. Hot air blowers are commonly known for their use to strip paint and weld or bend plastics. However, these handy tools are so much more versatile than just plastic welding tools.mobile phone maintenance, and its technical requirements are also high. The industrial hot air gun is used to remove and install small parts of large integrated circuits. Different occasions have different special requirements for the temperature and air volume of the industrial hot air gun.

1. Thawing
Set the power tool hot air gun at 50-150 ° C to thaw the freezing tube. It is widely used in daily life, such as defrosting of refrigerators, freezing of faucets in winter, freezing of pipes, etc., to prevent damage caused by direct impact.

heat gun news-1
heat gun news

2. Purging pipe
Setting the electric hot air blower at 200-230 ° C allows bending of plastic hoses, usually for decoration and wiring. At this temperature, you can also soften the dry paint and grinding powder.

3. Soften mucus

When the advertisement is pasted on the door or car, it is easy to damage the raw materials with a scraper. Heat with a heat shrink hot air gun for a few minutes and keep the temperature at about 230-290 ° C. Using the duckbill nozzle in the diffused airflow area, you can soften the adhesive and self-adhesive adhesive, gently remove them, and wash them with water without leaving adhesive marks.

heat gun news-2

Please remember to use the hot air blower safely and choose to work in a well ventilated place. After replacing parts or completing work, turn off the power and wait for cooling. If it is not used for a long time, the plug should be unplugged to better enjoy the different functions of the hot air gun and meet the needs of different life scenes!

Post time: Oct-27-2022